SHAILESH
shearing machines have been designed and developed
through structural analysis technique for continuous
production, accuracy and repeatability.
Frame
:
Rigid
steel frame of SHAILESH shears are optimally
designed to avid weak sections at load
supports and is of interlocked design.
The ram is guided throughout its length
by hardened and ground guide ways ensuring
proper clearance and clean cut.
Hold-Down
System :
Spring
loaded mechanical hold-down pads hold
the sheets securely to avoid slipping
and bowing result in clean square cut.
Hold down units are provided with oversize
pads to avoid impression on sheet metal.
Blades
:
SHAILESH
shear are provided with Four Edge, single
& segment ally High Carbon, Chromium
Steel Blades suitable for M.S. &.S.S.
Cutting and Extra long life.
Lubrication
:
All
bearing parts and guide surfaces are lubricated
Through centralize hand-operated lubrication
system.
Mechanical
Back Gauge :
This
is a standard equipment provided on all
SHAILESH Shears. Scale on the back gauge
gives instantaneous reading of distance
between shear and back gauge, thus avoiding
errors and maintenance encountered in
electronic equipment.
Finger
Guard :
Fitted
in front of hold-down for operator safety
without obstructing viewing.
Standard
Equipment :
Electrical
System consisting of motor & Control
Panel of Starter, Gear and wheel guard,
V-Belts, Hand operated back gauge, Manual
Lubrication System, T-slot front gauge,
Front scale gauge, instruction Manual.
Optional
Equipment :
Hydraulic
hold-down system, Automatic lubrication
system, Ball roller or Ball Transfer,
Foundation bolts, Extension squaring arm.
Note
:
Electrical
and Blades are not under Warranty.
Mechanical Guillotine
Shearing Machines :
"Shailesh"
brand mechanical shearing machines are available
in two versions i.e. under crank and over crank
having capacities starting from 500 mm to over
3000 mm and with thickness varying from 2 to
12mm. Machines incorporate several standard,
optional features like hold down systems- mechanical,
hydraulic manual or auto lubrication systems-
mechanical back gauge; ball roller or ball transfers;
extension squaring arm finger guard etc. Special
versions can also be offered to meet specific
production requirements.
